KBL 4800 alpha - Aroma- und Aquacool; Replacing the Aquacool Canister; Replacing the Aquacool Nozzles

Operating Instructions | KBL 4800 alpha
50
10.16 Aroma- und aquaCool
↵
WARNING
• Risk of infections
• Function of nozzles impaired.
Do not use any agents other than aqua-
Cool and Aroma gel supplied by KBL.
REPLACING THE AQUACOOL CANISTER
• If the fluid level drops to a minimum, correspond-
ing messages are displayed at the internal control
panel.
• If the canister is used up, another message appears
and aquaCool switches off.
Due to the system a residual amount
remains in the canister.
㉜
㉝
⇒
Open the bed part.
㉜
Unscrew the lid.
Keep the hose end including the lid in a clean
plastic bag while replacing the canister.
㉝
Replace the canister.
⇒
Start aquaCool initialization (service menu).
REPLACING THE AROMA TIN
When the Aroma tin is empty, a corresponding
message is displayed.
㉟
㉞
⇒
Open the bed part.
㉞
Unlock the retaining bracket.
㉟
Replace the tin.
⇒
Reset the Aroma counter in the service menu
to 0 (Reset). Then the message on the interior
control panel will disappear.
10.18 Replacing the aquaCool
nozzles
After 1,000 hours of operation, the aquaCool nozzles
must be replaced in order to ensure that the aquaCool
system functions properly. The assembly instructions
are included with your spare parts delivery.