To Next Page

To Previous Page

V2.01

25359_EDEBDA0279-2320-1_EN

Installation and electrical connection of the system

5.4 Standard connection diagram

NOTE

When connecting the phase (L1) to terminal 1 and the neutral conductor (N) to terminal 2

(Ph-N100V – 240V+/-10 % 50Hz/ 60 Hz/DC) the safety device and the disconnector in the

supply line to terminal 2 (N) are not required.

The safety device and the disconnector to terminal 2 (N) are only required for the follow-

ing connection variants:

Alternating voltage:

Terminal 1 (L1) and terminal 2 (L2):

US1 Phase-Phase 100V - 240V +/-10% 50Hz/60 Hz

Direct voltage:

Terminal 1 (+) and terminal 2 (-):

US1 100V - 240V +/-10% DC

Connection variants of the power supply

Terminal 1 Terminal 2 Voltage Safety device and

disconnector to

Terminal 2 required

Power supply unitUS1

Phase L

Neutral

conductor N

100V - 240V +/-10% AC 50/60 Hz No

PhaseL1 PhaseL2 100V - 240V +/-10% AC50/60 Hz yes

+ - 100V - 240V +/-10% DC yes

Questions and Answers:

Need help?

Do you have a question about the KBR multicomp F144-MS-1V1C1TI6RO-3 and is the answer not in the manual?

KBR multicomp F144-MS-1V1C1TI6RO-3 Specifications

General