KBR multicomp F144-MS-1V1C1TI6RO-3 User Manual

V2.01
25359_EDEBDA0279-2320-1_EN
41
Description of the display window
 Bus mode:
In this submenu, the bus protocol of the device can be set. to KBR eBus or Modbus RTU.
If Modbus RTU is selected, you can set the transmission parameters now. The supported
transmission parameters are:
 Baud rate (Baud) 4800, 9600, 19200, 38400
Parity even, odd, none
Data bits 8
Stop bits 1 for even and odd, 2 for Parity none
The KBR eBus setting is used for testing purposes.
 Learning mode:
In this submenu, you can show or hide the submenu item "Activate learning mode" (in
the Commissioning menu).
 Key sounds:
In this submenu, you can turn the key sounds (which sound if a sensor button is
pushed) on or o.
 Delete EEP:
For production purposes only.

KBR multicomp F144-MS-1V1C1TI6RO-3 Specifications

General

Brand	KBR
Model	multicomp F144-MS-1V1C1TI6RO-3
Category	Controller
Language	English