To Next Page

To Previous Page

GB - 6

Preface

Tests can only be done within the application by the machine manufacturer. They must be

repeated,evenifonlypartsofhardware,softwareortheunitadjustmentaremodied.

Unauthorised opening and tampering may lead to bodily injury and property damage and

may entail the loss of warranty rights. Original spare parts and authorized accessories by the

manufacturer serve as security. The use of other parts excludes liability for the consequences

arising out of.

Thesuspensionofliabilityisespeciallyvalidalsoforoperationinterruptionloss,lossofprot,

datalossorotherdamages.Thisisalsovalid,ifwereferredrsttothepossibilityofsuch

damages.

If single regulations should be or become void, invalid or impracticable, the effectivity of all

other regulations or agreements is not affected.

Through multitude applications not each possible case of installation, operation or mainte-

nance can be considered. If you require further information or if special problems occur which

are not treated detailed in the documentation, you can request the necessary information via

the local KEB agency.

1.4 Copyright

The customer may use the instruction manual as well as further documents or parts from it for

internal purposes. Copyrights are with KEB and remain valid in its entirety.

KEB

, COMBIVERT

, COMBICONTROL

and COMBIVIS

are registered trademarks of Karl

E. Brinkmann GmbH.

Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their re-

spectiveownersandarelistedinthefootnoteontherstoccurrence.

When creating our documents we pay attention with the utmost care to the rights of third par-

ties. Should we have not marked a trademark or breach a copyright, please inform us in order

to have the possibility of remedy.

1.5 Speciedapplication

The used semiconductors and components of KEB are developed and dimensioned for the

use in industrial products. If the KEB COMBIVERT F5 is used in machines, which work under

exceptional conditions or if essential functions, life-supporting measures or an extraordinary

safetystepmustbefullled,thenecessaryreliabilityandsecuritymustbeensuredbythe

machine builder. The operation of our products outside the indicated limit values of the techni-

cal data leads to the loss of any liability claims. The safety function is limited to a service life

of 20 years. After this time the unit must be replaced.

KEB COMBIVERT G6 Safety Manual

Other manuals for KEB COMBIVERT G6