KeContact P20 Installation
Installation manual, Version: 1.41 / Article no.: 90064 21
© KEBA 2012-2013
It is important to ensure that the connection cable is inserted through the center of the double
membrane seals to ensure the correct sealing of the device.
Flush-mounted box
Cable outlet
A double flush-mounted box with separating
divider for secure separation can be provided
for the cable insertion.
[A]… mains supply line
[B]… control line
[C]… Ethernet
4.3 Mounting the charging station
Installation materials
The included installation material is suitable for cement, brick and wood (without anchors).
For other surfaces, a suitable method of installation must be selected.
Installation materials that deviate from the supplied standard installation set must be
made available on site.
A proper mounting is absolutely necessary and lies outside of the scope of responsi-
bility of KEBA AG.
Please also observe the following manufacturer instructions:
Instructions for placing anchors and bolts. Source: Fischer
To Next Page
Loading...
