Keba KeContact P20 - Electrical Connection; Connection Overview with Opened Connector Panel Cover

To Next Page

To Previous Page

Installation KeContact P20

24 Installation manual, Version: 1.41 / Article no.: 90064

4.4 Electrical connection

4.4.1 Connection overview with opened connector panel cover

Connection overview

[1]… Mains supply terminal - Phase conductor 1 [T1]… Service button

[2]… Mains supply terminal - Phase conductor 2 [LED]…Status LED (internal)

[3]… Mains supply terminal - Phase conductor 3 [X1]… Enable input

[N]… Mains supply terminal - N conductor [X2]… Switch contact output

[PE]… Mains supply terminal - PE conductor [X3]… Ethernet2 connection (debug)

[F1]… Fuse holder [X4]… Ethernet1 connection (LSA+ terminals)

[DSW1]…DIP-switch configuration [Gnd]…Ground for Ethernet1 connection terminals

[DSW2]…DIP-switch addressing

Other manuals for Keba KeContact P20