Keba KeContact P20 - Troubleshooting; Common Problems and Solutions

KeContact P20 Installation
Installation manual, Version: 1.41 / Article no.: 90064 17
© KEBA 2012-2013
4.1 Preparing the housing
4.1.1 Removing the housing cover
Cover screws
Cover screws
► Unscrew the two cover screws [S] on the
bottom side of the housing cover.
Removing the housing cover
Removing the housing cover
► (1) Pull the housing cover out slightly.
► (2) Slide the housing cover up slightly to
unhinge it.