35
SOFT BRAKES OR TOO MUCH LEVER TRAVEL
Ensure proper brake fluid level.
Inspect both pads and shoes for proper travel and excessive wear.
Ensure absence of air in brake lines.
Inspect system for leaks.
Inspect caliper piston seal for signs of aging/damage.
Verify that wear on brake pads and rotor is within limits, with no damage or warping.
Inspect master cylinder reservoir for signs of aging/damage.
HARD BRAKES OR STIFF LEVER FEEL
Inspect both pads and shoes for proper travel, contamination, and excessive wear.
Inspect all mechanical components of drum brakes and ensure proper fit/adjustment.
Ensure fluid flow through lines (no blockage, collapsing, etc.).
Verify proper caliper and piston movement.
Ensure brake rotor is not damaged or warped.
Inspect master cylinder plunger and bushing for proper travel as well as signs of excessive
wear.
To Next Page
Loading...
