KEEWAY 50cc Series User Manual

41
If engine compression is below specifications, repeat test procedure, placing several
drops of oil into combustion chamber JUST BEFORE connecting compression gauge.
If the compression rises to within range, there is excessive wear or damage to the
cylinder, piston, rings, or cylinder head/gasket.
Ensure proper valve timing and seat
Ensure proper cylinder head gasket seat and seal, and proper torque applied to head bolts.

KEEWAY 50cc Series Specifications

General

Cooling System	Air-cooled
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Tires Front	120/70-12
Tires Rear	130/70-12
Width	700 mm
Transmission	Automatic
Engine Type	Single-cylinder, 2-stroke