58
[Check coolant capacity]
The total amount of coolant in the cooling system is about 2000ml
1. Park the motorcycle on a flat ground with a single support.
2. Check the coolant level when the engine is cooling. The coolant level should be between the upper and lower scale lines.
[Add a small amount of coolant]
If the coolant in the auxiliary water tank is at or below the lower mark, please add special coolant to the upper mark in time.
[How to add]
1. Park the motorcycle with a single support on a flat ground
and wait for the engine to cool; otherwise the heat may cause
burns to the skin;
2. Unscrew the water tank cover;
3. Pour the cooling liquid from the mouth of the water tank, and
add the cooling liquid to the position of the upper scale line;
4. Close the water tank cover.
[Storage of Coolant]
1. When the coolant is not in use, it should be stored in a special sealed container.
2. It should be placed in a cool and dry place. The coolant is a toxic liquid and must be kept away from children.
3. Note that the coolant should be strictly prevented from being contaminated by petroleum products, and it is not allowed to mix or store two
different brands of coolant.
To Next Page
Loading...
Need help?
General
