appeNdiCes
38
QuNeo
Preset 14 (Battery):
This preset is for use with our Native Instrument’s Battery 3 template le. This template will turn the QuNeo into a
sampler with loops on the left 8 pads and both rotaries and quick drum hit samples on the right 8 pads. The sliders
provide additional control and effects.
The image below shows what each sensor controls in our Battery Template (included in the QuNeo Software
Installer):
This image shows what MIDI data will output for each sensor in the “Battery” preset. In this preset the Pads use Drum
Mode in the left 2 columns and grid mode in the right 2 columns. Banks are not enabled. Rotaries are set to use
Location instead of Direction. Pass Thru Widths for the rotaries are set to 127. X/Y sources on the Pads are set to
latch. Velocity response is variable for notes on Pads and Rotaries. Velocity is xed at 127 for notes on the Buttons.
All Pressure sources send out continuous CC values.
For more information about using the Battery Template read the Battery Template Quickstart document in the
QuNeo directory: “Documentation/Template Quickstarts”.
To Next Page
Loading...
Need help?
General