Keithley 2260B-30-36 - Appendix; 2260 B Default Settings

2260B Series Programming Manual
98
APPENDIX
2260B Default Settings
The following default settings are the factory configuration settings
for the power supply.
Initial Settings
Default Setting
Output Off
LOCK 0 (Disabled)
Voltage 0V
Current 0A
OVP Maximum
OCP Maximum
Normal Function
Settings Setting Default Setting
Output ON delay time F-01 0.00s
Output OFF delay time F-02 0.00s
V-I mode slew rate select
F-03 0 = CV high speed priority
Rising voltage slew rate F-04 60.00V/s (2260B-30-XX)
160.0V/s (2260B-80-XX)
Falling voltage slew rate F-05 60.00V/s (2260B-30-XX)
160.0V/s (2260B-80-XX)
Rising current slew rate F-06 72.00A/s (2260B-30-36)
144.0A/s (2260B-30-72)
27.00A/s (2260B-80-13)
54.00A/s (2260B-80-27)
Falling current slew rate F-07 72.00A/s (2260B-30-36)
144.0A/s (2260B-30-72)
27.00A/s (2260B-80-13)
54.00A/s (2260B-80-27)
Internal resistance
setting
F-08
0.000Ω