Keithley 2260B-30-36 - System:communicate:gpib[:Self]:Address; System:communicate:lan:gateway; System:communicate:lan:ipaddress

REMOTE CONTROL
69
SYSTem:COMMunicate:GPIB[:SELF]:ADDR
ess
Description
Sets or queries the GPIB address. This setting is
only applied after the power has been cycled.
Syntax
Query Syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Parameter/Return
<NR1>
0~30
Example SYST:COMM:GPIB:SELF:ADDR 15
Sets the GPIB address to 15.
SYSTem:COMMunicate:LAN:IPADdress
Description
Sets or queries LAN IP address. This setting is only
applied after the power has been cycled.
Syntax
Query Syntax
SYSTem:COMMunicate:LAN:IPADdress <string>
SYSTem:COMMunicate:LAN:IPADdress?
Parameter/Return
<string>
LAN IP address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:IPAD “172.16.5.111”
Sets the IP address to 172.16.5.111.
SYSTem:COMMunicate:LAN:GATEway
Description
Sets or queries the Gateway address. This setting is
only applied after the power has been cycled.
Syntax
Query Syntax
SYSTem:COMMunicate:LAN:GATEway <string>
SYSTem:COMMunicate:LAN:GATEway?
Parameter/Return
<string>
Gateway address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:GATE “172.16.0.254”
Sets the LAN gateway to 172.16.0.254.
Set
Query
Set
Query
Set
Query