Keithley 2260B-30-36 - Display:blink; Initiate Initiate[:Immediate]:Name

REMOTE CONTROL
45
DISPlay:BLINk
Description
Turns blink on or off for the display.
Syntax
Query Syntax
DISPlay:BLINk { 0 | 1 | OFF | ON }
DISPlay:BLINk?
Parameter 0
<NR1>Turns blink OFF
OFF
Turns blink OFF
1
<NR1> Turns blink ON
ON
Turns blink ON
Return parameter
0
<NR1>Turns blink OFF
1
<NR1>Turns blink ON
Example DISP:BLIN 1
Turns blink ON.
Initiate Commands
INITiate[:IMMediate]:NAME ............................................ 45
INITiate[:IMMediate]:NAME
Description
The INITiate command starts the TRANsient or
OUTPut trigger.
Syntax INITiate[:IMMediate]:NAME {TRANsient|OUTPut}
Parameter TRANSient
Starts the TRANsient trigger.
OUTPut
Starts the OUTPut trigger.
Example INITiate:NAME TRANient
Starts the TRANSient trigger.
Set
Query
Set