Keithley 2260B-30-36 - Stb; Trg; Tst; Wai

REMOTE CONTROL
77
Parameter <NR1>
0~255
Return parameter
<NR1>
Returns the bit sum of the Service Request
Enable register.
*STB
Description
Queries the bit sum of the Status Byte register with
MSS (Master summary Status).
Query Syntax *STB?
Return parameter
<NR1>
Returns the bit sum of the Status Byte register
with the MSS bit (bit 6).
*TRG
Description
The *TRG command is able to generate a “get”
(Group Execute Trigger). If the 2260B cannot
accept a trigger at the time of the command, an
error message is generated (-211, “Trigger
ignored”).
Syntax *TRG
*TST
Description
Executes a self test.
Query Syntax *TST?
Return parameter
0
Returns “0” if there are no errors.
<NR1>
Returns an error code <NR1> if there is an
error.
*WAI
Description
Prevents any other commands or queries from
being executed until all outstanding commands
have completed.
Syntax *WAI
Query
Set
Query
Set