Keithley 2260B-30-36 - Output:delay:off; Output:delay:on

REMOTE CONTROL
47
Output Commands
OUTPut:DELay:ON............................................................ 47
OUTPut:DELay:OFF .......................................................... 47
OUTPut:MODE................................................................... 48
OUTPut[:STATe][:IMMediate] .......................................... 48
OUTPut[:STATe]:TRIGgered ............................................ 48
OUTPut:PROTection:CLEar ............................................. 50
OUTPut:PROTection:TRIPped ......................................... 50
OUTPut:DELay:ON
Description
Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.000 by default.
Syntax
Query Syntax
OUTPut:DELay:ON <NRf>
OUTPut:DELay:ON?
Parameter <NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter
<NRf>
Returns the delay on time in seconds until the
output is turned on.
OUTPut:DELay:OFF
Description
Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.000 by default.
Syntax
Return Syntax
OUTPut:DELay:OFF <NRf>
OUTPut:DELay:OFF?
Parameter <NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter
<NRf>
Returns the delay off time in seconds until the
output is turned off.
Set
Query
Set
Query