Keithley 2260B-30-36 - System Function Command; System System:configure:beeper[:State]; System:configure:beeper[:State]

2260B Series Programming Manual
64
System Function Command
SYSTem:CONFigure:BEEPer[:STATe]............................ 64
SYSTem:CONFigure:BLEeder[:STATe] .......................... 65
SYSTem:CONFigure:BTRip[:IMMediate] ........................ 65
SYSTem:CONFigure:BTRip:PROTection ....................... 65
SYSTem:CONFigure:CURRent:CONTrol ....................... 66
SYSTem:CONFigure:VOLTage:CONTrol ...................... 66
SYSTem:CONFigure:MSLave ............................................ 67
SYSTem:CONFigure:OUTPut:EXTernal[:MODE] ....... 67
SYSTem:CONFigure:OUTPut:PON[:STATe] ................ 67
SYSTem:COMMunicate:ENABle ...................................... 68
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess .......... 69
SYSTem:COMMunicate:LAN:IPADdress ....................... 69
SYSTem:COMMunicate:LAN:GATEway ........................ 69
SYSTem:COMMunicate:LAN:SMASk .............................. 70
SYSTem:COMMunicate:LAN:MAC ................................. 70
SYSTem:COMMunicate:LAN:DHCP ............................... 70
SYSTem:COMMunicate:LAN:DNS .................................. 71
SYSTem:COMMunicate:LAN:HOSTname ...................... 71
SYSTem:COMMunicate:LAN:WEB:PACTive ................ 71
SYSTem:COMMunicate:LAN:WEB:PASSword ............. 72
SYSTem:COMMunicate:USB:FRONt:STATe ................. 72
SYSTem:COMMunicate:USB:REAR:ST ATe ................... 72
SYSTem:ERRor .................................................................... 72
SYSTem:KLOCk .................................................................. 73
SYSTem:INFormation ......................................................... 73
SYSTem:PRESet ................................................................... 74
SYSTem:VERSion ................................................................ 74
SYSTem:CONFigure:BEEPer[:STATe]
Description
Sets or queries the buzzer state on/off.
Syntax
Query Syntax
SYSTem:CONFigure:BEEPer[:STATe] {OFF|ON|0|1}
SYSTem:CONFigure:BEEPer[:STATe]?
Parameter 0
<NR1> Turns the buzzer off.
OFF
Turns the buzzer off.
1
<NR1> Turns the buzzer on.
ON
Turns the buzzer on.
Set
Query