Keithley 3720-ST

Series 3700A System Switch/Multimeter Reference Manual Section 10: Instrument programming
3700AS-901-01 Rev. D/June 2018 10-67
TSP-Net instrument commands: General device control
The following instrument commands provide general device control:
tspnet.clear() (on page 11-434)
tspnet.connect() (on page 11-434)
tspnet.disconnect() (on page 11-436)
tspnet.execute() (on page 11-436)
tspnet.idn() (on page 11-437)
tspnet.read() (on page 11-438)
tspnet.readavailable() (on page 11-439)
tspnet.reset() (on page 11-440)
tspnet.termination() (on page 11-440)
tspnet.timeout (on page 11-441)
tspnet.write() (on page 11-445)
TSP-Net instrument commands: TSP-enabled device control
The following instrument commands provide TSP-enabled device control:
tspnet.tsp.abort() (on page 11-442)
tspnet.tsp.abortonconnect (on page 11-442)
tspnet.tsp.rbtablecopy() (on page 11-443)
tspnet.tsp.runscript() (on page 11-444)