Keithley 3720-ST

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-109
comm.lan.web.enable
This attribute describes whether or not communication using the web interface is enabled.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile
memory
true (enabled)
Usage
state = comm.lan.web.enable
comm.lan.web.enable = state
state
true: Enabled
false: Disabled
Details
This performs the same function as the MENU > LAN > ENABLE > WEB option that is available
through the front panel of the instrument.
Example
comm.lan.enable = true
comm.lan.web.enable = false
Enable all LAN communication with
instrument, then disable only web
communication over the LAN.
Also see
comm.lan.enable (on page 11-106)
comm.lan.rawsockets.enable (on page 11-107)
comm.lan.telnet.enable (on page 11-107)
comm.lan.vxi11.enable (on page 11-108)