2-4 Remote Operation Series 2600 System SourceMeters User’s Manual
2600S-900-01 Rev. A / May 2006 Return to In this Section:
How do I use Test Script Builder?
Reference Refer to Section 2 of the Series 2600 Reference Manual for com-
plete details on using the Test Script Builder.
Step 1: Run Test Script Builder
Run the Test Script Builder program in the Keithley Instruments folder in the
usual manner. The initial startup screen shown in
Figure 2-3 will be displayed.
The main sections of the screen are briefly described below.
Menu Bar
Main menu items include:
File – Allows you to control projects and files.
Edit – Performs a number of editing functions on script files.
Navigate – Navigates through projects.
Project – Opens, closes, and builds projects.
Run – Runs scripts.
Window – Selects which window to display.
Help – Provides access to online help files.
Project Navigator pane
The window pane on the left side is where the Project Navigator resides. The
navigator consists of created project folders and the script files (.tsp) created for
each project. Each project folder can have one or more script files.
Script Development pane
The script chunk is written in the upper window pane. It is in this area that scripts
are written and/or modified. Notice that there is a tab available for each opened
script file. A script project is then downloaded to the SourceMeter and run.
Sourcemeter/Script Interaction pane
A number of tabs in the lower window pane provide additional interaction between
the Test Script Builder, the SourceMeter and the opened script (the tabs displayed
will depend on those selected in the menu).
To Next Page
Loading...
Need help?
General
