Kemppi Minarc Evo 150 Service Manual

Service manual Minarc Evo 150 and 180
Version 1.3
30.9.2015
14
Kemppi Oy
Parameter values can be changed by using the buttons Remote ON/OFF and TIG/MMA separately.
Picrute3. Changing parameter value.
Increasing or decreasing the parameter value, affects the machine in different ways depending on the
parameter. Example above is for illustration only, see the chapter “Calibration procedure” to get the step
by step instructions on how to proceed.
Parameter 3: Display
current offset min. (10A)
Increasing the parameter value:
Parameter 3: Display
current offset min. (10A)
Press to increase the parameter value
Press to decrease the parameter value

Kemppi Minarc Evo 150 Specifications

General

Brand	Kemppi
Model	Minarc Evo 150
Category	Welding System
Language	English