Kenwood CS-5200 Series - Page 10

4. SPECIFICATION
Items
CS-5230, 5235
CS-5260, 5265
CS-5270, 5275
CRT
Type
150 mm rectangular tube with an integral graticule
Acceleration voltage
Approx. 12 kV
Effective area
8 x 10 divisions (1 division = 10 mm)
VERTICAL AXIS (COMMON TO CHANNELS 1 AND 2)
Sensitivity (+10 to +35°C)
1 mV, 2 mV/div : ±5X, 5 mV to 5 V/div: ±3%
Attenuat ion
1-2-5 steps, 12 ranges, fine control between ranges
Input impedance
1 Mfi ± 2%, approx. 25 pF
Frequency
response
(-3 dB)
(+10 to +35°C)
5mV to 5V/div
DC: DC to 40MHz
AC: 5Hz to 40MHz
DC: DC to 60MHz
AC: 5 Hz to 60MHz
DC: DC to lOOMHz
AC: 5Hz to lOOMHz
Frequency
response
(-3 dB)
(+10 to +35°C)
ImV to 2mV/div
DC: DC to 20MHz, AC: 5Hz to 20MHz
Rise time
(+10 to +35°C)
5mV to 5V/div
Approx. 8. 8 ns
Approx. 5. 8 ns
Approx. 3. 5 ns
Rise time
(+10 to +35°C)
ImV to 2mV/div
Approx. 17. 5 ns
Signal delay time
The leading edge may be checked using a square wave of the
rise time less than that of this model.
Crosstalk
-40 dB or less (at 1 kHz)
AMaximum input voltage
500 Vp-p or 250 V (DC + AC peak, 1 kHz or less)
VERTICAL AXIS (CH3)
Sensitivity (+10 to +35°C)
0. 1 V/div: ±3%
Input impedance
1MQ ± 2%, approx. 25 pF
Frequency response (-3 dB)
( + 10 to +35XO
DC to 40 MHz
DC to 60 MHz
DC to 100 MHz
Rise time ( + 10 to +35°C)
Approx. 8. 8 ns
Approx. 5. 8 ns
Approx. 3. 5 ns
Signal delay time
The leading edge may be checked using a square wave of the
rise time less than that of this model.
AMaximum input voltage
100 Vp-p or 50 V (DC + AC peak, 1 kHz or less)
Operat ion
Single trace: CHI, CH2, CH3 or ADD single trace operation
Multi-trace : 2 to 4 traces of CHI, CH2, CH3 and ADD
Operat ion
ALT/CHOP: Display by selecting ALT and CHOP
ADD : Composite waveform of CHI and CH2 signals are
displayed.
6