<Steering Remote Controller>
Assign the functions to the keys on the remote
controller on the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
• For connection, see page 51 for more information.
1 Touch [SET] for <Steering Remote
Controller> to display the setting screen.
2 Press and hold a button on the steering
remote controller to register.
3 Select a function to assign to the selected
button.
Steering Remote Controller Setting
VOL
Performing Steering Wheel Remote Control Learning Process.
Press each of the buttons in sequential order.
VOL
ATT
SRC
Done
<SET-UP Memory>
Memorise, recall, or clear the settings you have made.
• The memorised settings are kept even when the unit
is reset.
• Available only when <SET-UP Memory> is set to
[Unlock] (selected initially).
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorised settings.
• Memory: Memorises the current settings.
• Clear: Clears the currently memorised settings and
return to the factory (Initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
You can also set to lock the <SET-UP Memory> from
being changed. Touch [Lock] to lock the settings.
• Some items in <SET-UP> menu, eg. <Speaker/
X’over>, cannot be adjusted when [Lock] is selected.
<Initialise>
Initialise all settings you have made. Touch and hold
[Enter] to initialise the settings.
• After initializing the settings, adjust the settings on
the <Initial Setup> screen.
<Serial Number>
Displays the serial number.
SettingsSettings
Select your Android usage — either [Android Auto]
(Initial) or [Mirroring for Android].
• This setting is available only in Standby Mode with
no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset the password of Android Auto wireless
connection. For details, see page 12.
<Beep>
This setting is available only when 2-way speaker
system is selected (page 36).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
44
ENGLISH
00DMX7722DABSE.indb4400DMX7722DABSE.indb44 2022/10/1716:202022/10/1716:20
To Next Page
Loading...
Need help?
General
