ES749 Flow Computer
39
The order code (part number) of the unit can be entered. This will
help in identifying what options were ordered.
Note:
• The order number is set at the factory and should only be
altered if options are added in the eld by an authorized
service technician.
• Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;
Flashing selections can be changed.
Store and Conrm entries with the ENTER key
Display: ES749V10P
ORDER CODE
The serial number of the unit is assigned at the factory.
Note:
Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;
Display: SN 12345
SERIAL NUMBER
ORDER CODE
SERIAL NUMBER
SYSTEM PARAMETERS
6.4
SYSTEM
PARAMETERS
(Continued)
SERIAL-NO. SENS.
The serial number or tag number of the owmeter can be entered.
Note:
Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;_, <, =, >, ?, etc.
Flashing selections can be changed.
Store and Conrm entries with the ENTER key.
Display: SN 12345
SERIAL-NO. SENS.
To Next Page
Loading...