440-BA-e-1744
Major display deviations (incorrect weighing results) may be experienced should
electromagnetic fields (e.g. due to mobile phones or radio equipment), static
electricity accumulations or instable power supply occur. Change location or remove
source of interference.
6.2 Unpacking / setup
Carefully remove the balance from the packaging, remove plastic cover and setup
balance at the intended workstation.
The balance must be installed in a way that the weighing plate is exactly in horizontal
position.
At the models 440-21N and 440-21A the transport securing must be removed before
the weighing plate is mounted.
Scope of delivery / serial accessories
• Balance (incl. protective cover)
• Weighing plate
• Mains power supply
• Operating Manual
• Windshield (440-21N, 440-21A)
6.3 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
To Next Page
Loading...
