440-BA-e-1744
weighing
function
The animal weighing function can be applied for busy weighing.
During a defined period the average
value of the weighing results is
formed.
The more unquiet the weighed item, the longer the period should
be selected.
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Press the MODE button several times until „ANL“ is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired settings by pressing the MODE key
ANL 3 Period 3 seconds
ANL 5 Period 5 seconds
ANL 10 Period 10 seconds
ANL 15 Period 15 seconds
ANL off Animal weighing not active
Use the SET key to confirm selection.
Put the weighing good (animal) on the weighing plate and press
the SET button. In the display runs a „Countdown“.
The average value of the weighing results is displayed and
remains displayed on the screen.
Use the SET key to change between animal weighing and
normal weighing.
Press the SET key to restart the weighing cycle for animal
weighing.
factory setting
This function resets all balance settings to factory setting.
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Press the MODE button several times until „rSt“ is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired settings by pressing the MODE key
Balance will be reset to factory setting.
The balance keeps its individual setting
Use the SET key to confirm selection. The balance returns to
weighing mode.
To Next Page
Loading...
Need help?
General
