KERN 440 Series User Manual

440-BA-e-1744
19
Percent
determination
Percentage calculation facilitates weight display in percent
related to a reference weight equivalent to 100 %.
 In weighing mode press MODE key repeatedly,
until [100 %] is displayed.
 Put a reference weight which corresponds to 100 %.
 Store by pressing the SET key. Remove reference weight.
 Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in
terms of the reference weight.
Back to weighing mode by pressing the MODE button.
MODE
CAL
SET
M

KERN 440 Series Specifications

General

Weighing plate material	stainless steel
Readability	0.01g
Calibration	External
Display	LCD
Reproducibility	0.01 g - 1 g
Minimum part weight at piece counting (Laboratory scale)	0.01g
Minimum part weight at piece counting (Precision scale)	0.01g
Power supply/adapter included	included
Weighing units	g, kg, oz, lb
Interface	RS232
Units	g, kg, oz, lb
Stabilisation time under laboratory conditions	2 seconds