440-BA-e-1744
6.8 Underfloor weighing
Objects unsuitable for placing on the weighing scale due to size or shape may be
weighed with the help of the flush-mounted platform.
Proceed as follows:
• Switch off the balance
• Open closing cover at the balance bottom.
• Suspend hook for underfloor weighing carefully and completely.
• Place weighing balance over an opening.
• Attach load to hook and carry out weighing procedure.
Fig. 1: Setup of balance for underfloor weighing
CAUTION
▬ Always ensure that all suspended objects are stable enough to hold
the desired goods to be weighed safely (danger of breaking).
▬ Never suspend loads that exceed the stated maximum load (max)
(danger of breaking)
▬ Always ensure that there are no persons, animals or objects that
might be damaged underneath the load.
After completing the underfloor weighing the opening on the bottom of
the balance must always be closed (dust protection).
To Next Page
Loading...
Need help?
General
