KERN 440 Series User Manual

440-BA-e-1744
15
8 Basic Operation
Start-up
 Press ON button.
The balance will carry out a self-test The balance is ready
for weighing when the weight display appears.
Switching Off
 Press OFF button, the display disappears
Weighing
 Place goods to be weighed on balance
 Wait for standstill control, after the standstill control, the
weighing unit appears right hand in the display (e.g. g or
kg)
 Read weighing result.
If the goods are heavier than the weighing range, the display
will show "Error" (=Overload), and a whistle is sounded.
Taring
 Place an empty weighing container, the weight of the
weighing container will be displayed.
 Press the TARE button, the zero display disappears. The
tare weight is saved until it is deleted.
ON
OFF
ON
OFF
TA R E

KERN 440 Series Specifications

General

Weighing plate material	stainless steel
Readability	0.01g
Calibration	External
Display	LCD
Reproducibility	0.01 g - 1 g
Minimum part weight at piece counting (Laboratory scale)	0.01g
Minimum part weight at piece counting (Precision scale)	0.01g
Power supply/adapter included	included
Weighing units	g, kg, oz, lb
Interface	RS232
Units	g, kg, oz, lb
Stabilisation time under laboratory conditions	2 seconds