KERN 440 Series - Filter; Display Background Illumination

440-BA-e-1744
28
Filter
Only models 440-21A,
440-35A, 440-49A
(exemple)
This menu item allows the balance to be set according to
specific ambient conditions and measuring purposes.
 In weighing mode keep the PRINT key pressed until
[Unit] appears.
 Press the MODE button several times until „StAbiL“ is
displayed.
 Acknowledge using SET button, the current setting is
displayed.
 Select the desired settings by pressing the MODE button.
1
Filter 1:
The balance reacts quickly and in a sensitive manner, quiet
set-up location.
2
Filter 2:
The scale reacts normally, normal installation site
3
Filter 3:
The balance reacts slowly and in a robust manner, busy set-up
location
 Use the SET key to confirm selection.
Display background
illumination
 In weighing mode keep the PRINT key pressed until
[Unit] appears.
 Press the MODE button several times until „bl“ is
displayed.
 Acknowledge using SET key, the current setting is
displayed.
 Select the desired settings by pressing the MODE key.
bl
on
Background illumination
switched on
Contrastful display which can
also be red in the darkness.
bl
off
Background illumination
switched off
Battery saving
bl
Ch
The background
illumination will be
switched off
automatically 10 sec after
having reached a stable
weighing value.
Battery saving
 Use the SET key to confirm selection.