KERN PRS User Manual

PRS/PRJ/ARS/ARJ-BA-def-0622 131
9.4 Setup for “SET APP COUNT”
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
• SETUP
APPLICATION
COUNT KEY 1 5
KEY 2 10
KEY 3 25
KEY 4 50
Reference quantity = 5
Reference quantity = 10
Reference quantity = 25
Reference quantity = 50
By using the “COUNT” program you can count items of uniform weight (screws, balls,
coins, etc.).
To do this you must first weigh a defined quantity of items (e.g. 5 items) and assign the
acquired reference weight to the reference quantity by pressing the relevant function key.
Depending on the weight and tolerances of the objects to be counted, you should count a
representative number of items to determine the reference weight.
• Function key legends:
«5» Definition of reference quantity as 5
up to
«50» Definition of reference quantity as 50
For further information on “Setting up parts counting”, see the example in Chapter 12.2.1.
• Display in the “COUNT” application:
+ 123.456 g
5 10 25 50
U U U U
«Õ» «Ö» «×» «Ø»
The value is first displayed in
gramme
Then press e.g. "5"
+ 5 g
5 10 25 50
U U U U
“Õ” “Ö” “×” “Ø”
The value is converted to items
(PCS) and displayed or printed out

KERN PRS Specifications

General

Brand	KERN
Model	PRS
Category	Scales
Language	English