EasyManua.ls Logo

Kernel KN-4006 Series - Operation

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KN-4006 series UV Radiation Treatment System
16
specific trait of the patient (skin pigment and
external factors that impact body sensitivity), then
adjust dose in compliance with the response after
exposure.
MPD or MED test: Because of individual sensitivity
differences to UV rays, so make the biological dose (MPD or MED)
as the unit of UV treatment. The biological dose: The time from
light first radiates on the skin till visible erythema can be see
(identified by naked eyes). Te s t results is better to be observed in
24 hours after irradiation. Test value will be helpful to choose the
right treatment dose in the initial therapy. For more details please
see Appendix C.
4.1.2 Operation
Attention! Before use, please take out the protection foam in
front of the tube.
Operator: wear UV protective goggles .
Power on test: turn on the equipment, check if every part is all
right.
NOTE: After startup instrument will be issued "di" of a sound,
verify the buzzer work is normal or not. If not normal
please contact with manufacturer or local dealers.
Time: Make the radiation time according to the required dosage: