EasyManua.ls Logo

Kernel KN-4006 Series - Treatment Illustration

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KN-4006 series UV Radiation Treatment System
17
radiation time(s)= .Setting the radiation time
according to the requirement
Patient: Expose treatment part to the UV lamp in the distance of
3cm, as Figure 4-1,
pic 4-1
Attention! Irradiator should be in its bent arrange, not be
overexertion or reverse bend.
Timing Start: Press to use this function.
After treatment: When radiation treatment is finished, device
stops radiating automatically and closes it according to the set
time.
Shutdown method: turn off the power switch, disconnect the
power cord.
Attention! Please hang to host its back to avoid tube or
chassis damage.
4.1.3 Treatment illustration
Summarize: UV phototherapy is a high effective therapy which
require the dermatologist have a certain degree of
phototherapy knowledge and experience, prohibit
]cm/mW[intensity
1000][J/cm dosage
2
2
´
UV LAMP
SKIN