KN-4006 series UV Radiation Treatment System
Appendix D Radiation Dosage/Intensity/Time calculation method
Method 1
：
According to the table
Users can find the radiation time directly from Appendix D.Common dosage/intensity/time calculation value are in below
table.The first line is radiation intensity ，the unit is mW/cm²；the first column is radiation dosage，the unit is J/cm
2
；the values in
the middle of the table are“radiation time”，the unit are “Min.：Sec.”：
Radiation time
(Min:Sec)
↘
Radiation Intensity
（
mW/cm²
）↓
For example
：
If the radiation intensity is 5.0mW/cm
2
（the actual value, please see table A-1 of appendix A）， and it needs the
radiation dosage for 2.5J/cm
2
，then we can find the radiation time is 8:20 from table D-2，that is 20sec past 8min.
Radiation time
(Min:Sec)
↘
Radiation Intensity
（
mW/cm²
）↓
To Next Page
