Kernel KN-4006 Series - Appendix F Declaration of the EUT; Guidance and Manufacturer´s Declaration - Electromagnetic Emission

KN-4006 series UV Radiation Treatment System
68
Appendix F Declaration of the EUT
Guidance and manufacturer´s declaration – electromagnetic emission –for all EQUIPMENT AND
SYSTEMS
Row
1
Guidance and manufacturer´s declaration – electromagnetic emission
2
The KN-4000 series UV Radiation Treatment System is intended for use in the electromagnetic environment specified
below. The customer or the user of KN-4000 UV Radiation Treatment System should assure that it is used in such an
environment.
3
Emissions test
Compliance
Electromagnetic environment - guidance
4
RF emissions
EN 55011
Group 1
The KN-4000 series UV Radiation Treatment System uses RF energy
only for its internal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby electronic
equipment.
5
RF emissions
EN 55011
Class B
The KN-4000 series UV Radiation Treatment System is suitable for use
in all establishments, including domestic establishments and those
directlyconnected to the public low-voltage power supplynetwork that
supplies buildings used for domestic purposes.
6
Harmonic emissions
EN 61000-3-2
Class A
7
Voltage fluctuations
/flicker emissions
Complies