KN-4006 series UV Radiation Treatment System
CHAPTER III PRODUCT CONFIGURATION
AND WORKING THEORY
3.1 Checking before installation
l Take o u t the equipment from the box, place it in safe,
stable location.
l Check the accessories according to the packing list.
3.2 Power supply connection
Figure 3-1 Interface
Power socket Connect the power plug to AC230V/50HZ
AC power outlet which is protective earthing.
“ ” Equipotential earthing terminal when the machine is
used with other device at the same time, the potential
equalization conductor should be use to connect the terminal
and other device equipotential earthing terminal to keep the
balance between devices potential,and keep safe.
Note: connecting wires should be green/yellow, ground impedance must be
To Next Page
