KN-4006 series UV Radiation Treatment System
l When you use the equipment for treatment, please
strictly confirm the indications, contraindications and
possible adverse reactions.
l In order to avoid circle danger, assure signal quality. The
instrument is connected to only with the protection of the
ground of the power supply socket, if the power supply
socket is not connected to ground wire, please do not
use this socket, and use the internal power supply.
l Patient and operator will not cause injury if a sudden
power failure occurs. Please turn off the power switch
and restart.
l Electromagnetic field may interfere with the normal
operation of equipment. Therefore, make sure the
neighboring external devices comply with EMC
requirements. X-ray equipment or magnetic resonance
device may be a source of interference, because they
can produce high-intensity electromagnetic radiation. At
the same time, pay attention away from mobile phones or
other communications equipment.
1.2 Notes
l Instrument is used for clinical care, only by trained
medical personnel in the specified usage situations. No
authorized personnel, or untrained personnel not to
monitor any operation
To Next Page
