KN-4006 series UV Radiation Treatment System
agent abrasive materials.
5. When the plug is occasional wet, please use distilled or
deionized water rinse, and then put it at 40 ℃ to 80 ℃ in the
dry environment for at least one hour.
6. If oxidation of the metal contacts of lamp holder and lamp,,
you can use cotton swabs with regular rubbing alcohol to
wipe.
7. Reflectors, such as contaminated with fingerprints or other
stains that can be used soft, lint-free cloth or cotton wool with
regular rubbing alcohol to wipe.
5.3 Storage
If a long time unused, the equipment should be wiped clean
and use dust cover to cover later. Storage environment should be
kept dry and ventilated.
5.4 Transport and storage
Transport: Equipment should be avoided by the pouring
rain and snow hit, and not with the corrosive substances, gases
mixed cases, allow for transportation by any mode of transport.
Storage: The complete product should be stored in dry and
ventilated, non-corrosive substances, no strong magnetic field of
the storehouse.
To Next Page
