KN-4006 series UV Radiation Treatment System
Appendix A radiation intensity
The radiation intensity will be recorded in Table A-1.
Table A-1 irradiation intensity setting
Radiation Intensity
（
mW/cm²
）
Attention: After a period of the usage of lamp, the value of exposure
intensity will attenuate correspondingly and should be
adjusted in time according to the condition (For example,
every usage of 100 hours or less time, when the intensity
attenuate obviously, after the replacement of lamp, or
other any may cause the change of the exposure intensity
value) of the usage of lamp, and should be acquired after
measurement by special tools. If it’s unable to determine
the accuracy of the exposure intensity value, please
contact the distributor or manufacturer to help you
determine.
To Next Page
