KN-4006 series UV Radiation Treatment System
Warning: Please cut off the power when replace the
lamps.
1) Remove the irradiation device.
2) Remove the fixed light buckle fastening screws, remove the
lamp buckle.
Figure 5-1 Figure 5-2
3) Slide the lamp to the left to separate it from the lamp holder,
hold the end of the lamp, uplift and pull it out gently.
Figure 5-3
4) Aiming the lamp at the lamp holder, push the lamp into the
holder. The two positioning holes aligned lamp shell lamp
buckle and fixing holes and fasten with screws. Mounted
lights comb.
To Next Page
