10
Description
Exit/Entry Delay: Your security system has been programmed with
delay times that allow you to exit the premises after arming, and to
disarm the system upon entry, before an alarm occurs. If you leave
the premises too late when exiting, or disarm too late when arriving
home, it will cause a false alarm. If an alarm occurs, you should
disarm the system immediately.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Arm Beep: When enabled, the external siren will sound when
armed or disarmed.
Keypad Lock: For additional security, you can require a passcode
to unlock the panel. The panel locks automatically if you don’t
operate the keypad on home screen for 30 seconds or so.
Backlight: When disabled, display backlight turn off after 30
seconds if no operation on home screen.
Human Voice: When enabled, you’ll hear a human voice that tell
you what done.
System Password: used for keypad unlocking and SMS remote settings.
User Password: user for keypad unlocking, SMS Remote Control
and alarm text notification prefix setting.
Language: Human Voice, Displaying and SMS notification will be
in the selected language. After selecting the desired language, the
panel will reset.
Initialization: If the factory default configuration is loaded, any data
that has already been programmed into the system will be changed
into the Factory Default Configuration!
To Next Page
Loading...
