Kessel Aqualift S Compact User Manual (English)

Other manuals for Kessel Aqualift S Compact

Installation And Operating Instructions100 pages

Questions and Answers:

G
Gina GarciaJul 27, 2025
What to do if Kessel Aqualift S Compact pump is not running?
- A
  Andrew WilliamsJul 27, 2025
  If the Kessel Home Automation pump isn't running, there are several potential causes: * There may be no mains voltage available, in which case you should check the mains voltage. * A fuse might have tripped in the mains fuse box; replace the fuse. * The connection cable could be damaged, requiring repair by an electrical specialist or service partner. * The float switch may be defective, so contact Customer Services. * The pump may be overheating; in this case, the submersible pump will restart automatically once the temperature returns to normal.
J
Justin PatelAug 1, 2025
Why is my Kessel Aqualift S Compact showing an incorrect level detected error?
- C
  Claudia WatersAug 1, 2025
  The pressure pipe may be blocked. In this case, you should carry out maintenance.
M
Michelle KingAug 6, 2025
What to do if Kessel Aqualift S Compact multi-vane impeller is blocked?
- D
  Dustin HammondAug 6, 2025
  If the multi-vane impeller is blocked, it's likely that contaminants or solids have lodged between it and the spiral housing. In this case, you should clean the pump.
L
Leslie OconnellAug 11, 2025
How to fix reduced performance in Kessel Home Automation?
- M
  Matthew StokesAug 11, 2025
  Reduced performance can occur if the intake cage is blocked. Clean the pump to resolve this issue.
R
Renee MendezAug 16, 2025
Why is my Kessel Lifting Systems pump not running?
- S
  ssmithAug 16, 2025
  If the Kessel Lifting System's pump isn't running, first check if mains voltage is available and ensure that the main power circuit breaker hasn't tripped. If the voltage is okay and the breaker is on, the connection cable might be damaged, requiring repair by qualified electricians or service partners. A defective float switch could also be the cause, in which case you should contact Customer Services. Finally, check if the pump has overheated; it will automatically restart when the temperature drops.
K
Kelsey Peterson MDAug 21, 2025
What to do if Kessel Lifting Systems has reduced pumping capacity?
- M
  Mark FarrellAug 21, 2025
  If your Kessel Lifting Systems pump has reduced pumping capacity, several factors could be responsible. First, the intake cage or ventilation pipe might be blocked and need cleaning. The spiral housing or multi-vane impeller could be worn and require replacement. Additionally, a pressure hose blocked with condensate can cause this issue; ensure the pressure hose is laid so that it is constantly rising, or install the compressor air bubbling set.