Personalized Parameter Settings
Personalized Parameter Settings can meet a variety of requirements. 8 settings are Battery Power Bar
Settings, Power assist level Settings, Over-current Cut Settings, Power Assist Sensor Settings, Speed Sensor
Settings, Throttle Function Settings, System Settings and Power-on Password Settings.
Hold UP and DOWN button simultaneously for 2 seconds to enter general settings and Hold UP and DOWN
button simultaneously for another 2 seconds to enter personalized parameter settings interface.
Press UP or DOWN button to choose the personalized parameter setting items, then press i button to enter
the corresponding setting interface.
Personalized setting items interface
◆
Battery Power Bar Settings
VOL represents voltage settings. Each bar represents a voltage value. Each of the 5 values is to be entered
one by one.
For example, VOL 1 is the first bar
voltage value, the default value is 31.5V. Press UP or DOWN to
increase or decrease the bar value. Press i button to store a changed setting and access the second bar.
Likewise you can set the values in the same manner for other bars. After values for 5 bars are entered completely,
long press i to confirm and return to the previous menu.
Battery bar settings interface
To Next Page
Loading...
