Key-Disp KD51C User Manual

Details the eBike display's name, model, and electrical/environmental specifications.

Provides dimensional drawings and visual appearance of the eBike display.

Lists the various functions and indicating elements of the KD51C eBike display.

Illustrates the functional area distribution and layout of the eBike display screen.

Instructions for turning the eBike system on/off and navigating the display interface.

Details on activating push-assistance and controlling the eBike lights.

Explains how to adjust and select different assist levels for the eBike motor.

Describes the display's indications for battery level and motor power.

Explains how error codes are displayed and what they signify.

Instructions for clearing the trip distance data on the display.

Adjusts display backlight brightness and switches between km/mi units.

Configures wheel diameter and sets the maximum speed limit for the eBike.

Allows customization of how battery power is displayed, adjusting voltage settings.

Selects assist modes and adjusts power ratios for each assist level.

Configures the current limit for the controller to protect the system.

Sets the direction of the power assist sensor (forward or backward).

Adjusts the sensitivity of the Power Assist Sensor (PAS).

Configures the number of magnets on the PAS disk for accurate readings.

Configures speed sensor settings, including magnet quantity.

Enables or disables the throttle's push-assistance function.

Controls whether throttle speed is limited by the current assist level.

Sets the delay time for battery power management.

Sets the maximum speed limit for the eBike system.

Enables or disables the push-assistance button function.

Configures the slow start-up behavior of the eBike.

Sets up a 4-digit code to secure the eBike system upon power-on.

Enables or disables the power-on password security feature.

Allows changing the existing power-on password.

Procedures for saving settings and exiting the current configuration menu.

Instructions for restoring the display to its factory default settings.

Details the warranty validity and conditions for the eBike display.

Illustrates the connector wire sequence and pinout for system connections.

Provides important cautions and safety guidelines for using the eBike display.

Lists and defines various error codes that may appear on the display.

Provides default ratio values for different assist levels, referenced in settings.