Slow Start up Settings
SSP represents slowly start up. The range is “1-4”, “4” is the slowest. The default value is “1”.
To change slowly start up settings, press the “+” or the “-” button to select the desired
value.
To store a changed setting, press the “i” button and return to Delay time settings for
battery power or hold the “i” button for 2s to return to previous menu.
Slow start up settings interface
◆Power-on Password Settings
PSd represents power-on password settings. Power-on password is a 4-digit code. The
default password is “1212”.
Press i button to enter the interface where “P2, 0000” is shown on the screen. Please
input the current password or default password’1212’.
Press i button to increase or decrease the number and press i button to confirm digits
one by one until the correct 4-digit password is completed. Press i button to access power-on
password Enable/Disable Settings.
Otherwise stay in password input state.
Power-on Password Input Interface
To Next Page
Loading...
Need help?
General
