General Operation
◆Switching the E-bike System On/Off
To switch on the E-bike system and provide the power supply to the controller, hold the
On/Off button on the remote for 1 second.
To switch off the E-bike system, hold the On/Off button for 2s. The E-bike system no
longer uses the battery power.
When E-bike system is switched off, the leakage current is less than 1 μA.
■When the E-bike is parked for approx. 10 minutes, the E-bike system switches off
automatically.
◆
Display Interface
After switching on the E-bike system, the display will show Current Speed and TRIP by
default.
Press “i” button on the remote to switch between the indication functions below:
Trip Distance (Km)→ODO (Km)→Trip Time (min)→Max. Speed (Km/h) → Avg. Speed
(Km/h) → RANGE (Km)
Display interface
◆
Switching Push-assistance Mode On/Off
To activate the push-assistance function, press and hold the “-” button on the remote.
After 2 seconds, the E-bike is activated to go at a uniform speed of 6 Km/h while the screen
shows ‘ ’.
The push-assistance function is switched off as soon as you release the “-” button .
To Next Page
Loading...
