◆Power-on Password Enable/Disable
To change power-on password enable/disable settings, press “+” or “-” button to choose
Y or N. Y means power-on password is enabled. N means power-on password disabled. The
default value is N.
If you choose Y, press the “i” button and then access power-on password change
interface.
If you choose N, you will exit the power-on password settings interface and return to
previous menu.
Power-on Password Enable/Disable Interface
◆Power-on Password Change
When the display shows P3, 0000, you can set a new power-on password. Press the “+”
or the “-” button to change the number and press the “i” button to confirm digits one by one
until a new 4-digit password is completed.
To store the new power-on password, hold the “i” button for 2s and then exit settings.
When switching on the E-bike system next time, the display will show P1,0000, please
input the new password to power on.
Power-on Password Change Interface
To Next Page
Loading...
Need help?
General
