◆
Toggle the unit KM/Mile
U represents unit settings, “1” is mile and “2” is kilometer.
The default value is “2”.
To toggle the unit, press the +/- button to switch between KM/Mile for the speed and mileage.
Press the i button to store a changed setting and then access trip distance clearance setting again
or hold the i button for 2s and exit General Settings.
Miles and KM toggling interface.
★
At General Settings page, hold i button ad - button for over 2 seconds to enter the wheel set and
speed limit set.
◆Wheel size set
Ld means wheel size，settable values are：16”,17”,18”,19”,20”,21”, 22”,23”,24”,25”,26”,700C，28”。Press+/-
to choose the desired wheel size to correctly show the speed and mileage on the display. Press i button to store a
changed set and access to the next set interface.
Wheel size interface
◆speed limit set
LS means top speed limit and the settable range is 12 km/h to 40km/h. press +/- to set the values and
press i button to confirm the setting.
Speed limit interface
To Next Page
Loading...
