◆
System settings
Delay time settings for battery power
DLY represents battery power delay time settings.
Press the +/- button to choose delay time 3s, 6s, 12s to change the settings.
Delay time settings for battery power
◆Push-assist enable set
PUS means push-assist enable set. Press +/- to choose Y or N. Y is enabled while N is disabled. Press i
button to confirm and enter the push-assist speed set. The default value is Y.
Push assist enable setting
◆SSP
SSP means slowly start up, range is 1~4. 4 is the slowest. Press +/- to choose your desired values. Hold i
button to confirm and exit the settings
To Next Page
Loading...
