Throttle push-assistance enable/disable
Throttle-PAS enable/disable
HF-y means throttle speed is limited by current assist level while HF-n means throttle speed is not limited by
current assist level. The default value is n.
If you choose y, the maximum speed can only be the highest speed powered by current assist level when you
twist the throttle.
If you choose n, the maximum speed is not limited by current assist level and you can override whatever level
you are in and reach rated maximum speed when you twist the throttle.
Press +/- to set Y or N and press i button to confirm and return to throttle push assistance enable/disable
setting interface or hold down the ‘i’ button for 2s to return to previous menu interface.
Throttle level enable/disable
To Next Page
Loading...
